Midport Electronics, Inc. 1-888-643-7678

Midport Electronics, Inc.

3101 W. Sylvania Ave

Toledo, Ohio 43613

Phone 888-643-7678 FAX 419-292-1196

Portables

Mobiles

Base/Repeaters

Misc. Equipment

Kenwood TK-260G/260G

General Specifications	TK-260G	TK-360G
Number of Channels	Max. 8
Frequency Range	150-174 MHz	450-470 MHz
Channel Spacing Wide/Narrow	25, 30 kHz/ 12.5, 15 kHz	25 kHz/ 12.5 kHz
PLL step	2.5, 5, 6.25, 7.5 kHz	5, 6.25 kHz
Channel Frequency Spread	24 MHZ	20 MHz
Antenna impedance	50 ohms
Operating Voltage	7.5 V DC +/- 20 %
Ambient Temperature Range	-30°C to +60°C
Frequency Stability	± 3 ppm	± 2.5 ppm
Battery Life (5-5-90 duty cycle with battery saver off) with KNB-14 (600mAh) with KNB-15A (1100mAh)	More than 4 hours More than 8 hours
Audio Output Impedance	4 ohms
Dimensions (W x H x D)	(2-5/16) x (5- 5/16) x (1 1/4) in
Weight	0.88 lbs (400 g) with KNB-14 battery and antenna
FCC ID	ALH29463110
FCC Compliance	FCC parts 22, 74, 80, 90, 95
IC Certification	28219551A	282195580A
Receiver Specifications	Measurements made per EIA standard EIA-RS 316B
Sensitivity (12 dB SINAD) Wide/Narrow	0.25 µV / 0.28 µV
Selectivity Wide/Narrow	70 dB / 60 dB
Intermodulation Distortion Wide/Narrow	65 dB / 60 dB
Spurious Response	70 dB
Audio Output	500 mW at less than 10% distortion
Transmitter Specifications	Measurements made per EIA standard EIA-RS 316B
RF Power Output (Hi/Low)	5W / 1W	4W / 1W
Spurious & Harmonics	70 dB
Modulation Wide/Narrow	16KoF3E / 11KoF3E
FM Noise Wide/Narrow	45 dB / 43 dB	45 dB / 40 dB
Modulation Distortion	Less than 5%
Military Standards 810 C/D/E
Method 506.1, Procedure 2 Method 506.2, Procedure 2 Method 506.3, Procedure 2 Method 507.1, Procedure 2 Method 507.2, Procedure 2	Method 507.3, Procedure 2 Method 510.1, Procedure 1 Method 510.2, Procedure 1 Method 510.3, Procedure 1 Method 514.2. Procedure 1	Method 514.3, Procedure 1 Method 514.4, Procedure 1 Method 516.2, Procedure 1,2,5 Method 516.3, Procedure 1,4 Method 516.4, Procedure 1,4
Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice.